Greetings
My son somehow caused an update to crash, I dont know if he ejected the cd or turned off the machine halfway thru the update. The machine is bricked and will not operate. There is a code but sadly I don't have those details.
Question to those in the know: Is it fixable? Can it be reset to factory settings somehow? Or is it dead?
Thanks
0
Bricked 360?
Started by gitanes, 2011-11-22 11:22
|
5 replies to this topic
#2
spacemunk
Senior Member Posted 2011-11-22 14:17:56
depends on which drive you are using u can reflash it again
#3
NHJ
Super Member Posted 2011-11-22 16:31:04
it is not a drive update it is a system update that failed.
have a look at that for a solution : http://www.factory-r...m/wiki/XBOX_360 otherwise it is fixable using a jtag/usb nand read/write. #4
gitanes
Newbie Posted 2011-11-23 13:02:45
it is not a drive update it is a system update that failed. have a look at that for a solution : http://www.factory-r...m/wiki/XBOX_360 otherwise it is fixable using a jtag/usb nand read/write. Thank you so much NHJ. Will let you know if it worked. Thanks mate. #5
mahtin
board stiff member Posted 2011-11-26 13:48:45
So not an IBM 360/40 mainframe, then.
Just having a senior moment. #6
beachyman
Senior Member Posted 2012-01-15 15:46:58
My gf did the same, you can get it fixed by reflashing at shops like at MBK, maybe fortune or panthip.
Look at 4th floor up and see the xbox, ps3 signs. Should not cost more than 2-3000THB, I paid 1500THB. |
Sponsored by: |
