Can anyone recommend a good place to get a Canon printer fixed in Ao Nang area, or if not in Krabi town ? New to the area and no idea where to take it for a reliable inexpensive deal. Any help on this welcome, thanks
Canon Printer Broken
Started by Harrykrabi, 2012-02-04 22:47
|
5 replies to this topic
#2Posted 2012-02-12 13:27:03
I always use the IT / Stationary shop a few doors away from the Ao Nang Market, they have a big repair area upstairs. I've used them for a few years now and always found them helpful & efficient, never seem to overcharge and the lady speaks quite good English. Good luck.
#3Posted 2012-02-12 14:07:22
I always use the IT / Stationary shop a few doors away from the Ao Nang Market, they have a big repair area upstairs. I've used them for a few years now and always found them helpful & efficient, never seem to overcharge and the lady speaks quite good English. Good luck. Thanks #4Posted 2012-02-12 21:39:10
I always use the IT / Stationary shop a few doors away from the Ao Nang Market, they have a big repair area upstairs. I've used them for a few years now and always found them helpful & efficient, never seem to overcharge and the lady speaks quite good English. Good luck.
Do you mean the market at the top of the hill by seven eleven near the junstion out of Ao Nang ? #5Posted 2012-02-13 13:45:24
it's called the "Ao Nang IT centre" tel: 075 695 280-1 or 081 378 7879, on the left hand side of the road from Ao Nang to Ao Nammao just a few doors before the market (on the same side).
It's less than one km from the road junction on the Ao Nang end (very dodgy junction this..always lots of accidents here so take care near this one..come to think of it..the roundabout the other end is just as dangerous :-) This IT place has always been good for me, much better than the places I used to go to in Krabi town altho I don't know if they do printer repairs. If it was me I'd phone this place first, if no joy then try the computer shop in Tesco near the food hall,,always lots of printers for sale there altho they never seem very 'switched on' if you get my drift! #6Posted 2012-04-22 10:32:06
Thanks for the directions, yes went there and they are very good and helpful but sadly for me the printer was beyond repair and they had to bin it
|
Sponsored by: |













